Oct 11, 2024  
2020-2021 Undergraduate Bulletin 
    
2020-2021 Undergraduate Bulletin [ARCHIVED BULLETIN]

Electrical Engineering, BS Major in


Return to {$returnto_text} Return to: Majors and Minors

Accredited by the Engineering Accreditation Commission of the ABET, http://www.abet.org

This program is intended for students who wish intensive study at the undergraduate level to develop proficiency in the field of electrical engineering. The curriculum provides a broad foundation in engineering, mathematics, physics and liberal arts. The broad range of Hofstra University resources in the humanities and social sciences make the liberal arts component especially enlightening.

They will develop design skills progressively, beginning with their first courses in circuit analysis and digital circuits and will apply their accumulating knowledge to practical problems throughout the curriculum. This process culminates in the capstone design course, which complements the analytical part of the curriculum.

Candidates for graduation with the BS degree in electrical engineering must fulfill the following requirements:

Program Requirements - Total Semester Hours: 133


1. The Successful Completion of 133 Semester Hours


The successful completion of 133 s.h. in Electrical Engineering and a cumulative grade point average of 2.0 in work completed at Hofstra. Military Science may not be counted toward this total semester hour requirement.

2. Liberal Arts


At least 68 semester hours must be completed in the liberal arts, with at least 48 of these semester hours taken outside of engineering.

3. Residence Requirements


There are two requirements that must ordinarily be completed in residence at Hofstra: 15 semester hours in the major field of specialization and the last 30 semester hours. The 15 semester hours need not be included within the last 30 hours.

4. General and Major Requirements


The general and major requirements as listed under the program below. Courses may not be taken on a Pass/D+/D/Fail basis. Transfer credit will only count toward the major for engineering courses completed with a minimum grade of C-.

Notes


This program is intended for students who wish intensive study at the undergraduate level to develop proficiency in the field of electrical engineering. The curriculum provides a broad foundation in engineering, mathematics, physics and liberal arts. The broad range of Hofstra University resources in the humanities and social sciences make the liberal arts component especially enlightening.

They will develop design skills progressively, beginning with their first courses in circuit analysis and digital circuits and will apply their accumulating knowledge to practical problems throughout the curriculum. This process culminates in the capstone design course, which complements the analytical part of the curriculum.

Program Educational Objectives


Within a few years of graduation, graduates of the BSEE program will accomplish the following objectives of:

  1. Become successful practitioners in electrical engineering. 
  2. Apply their technical skills and liberal arts background in a socially responsible manner. 
  3. Continue to develop intellectually. 
  4. Acclimate to their chosen professional or business environment, where they will have the ability to work in teams, as well as communicate and interact with clients and with the public. 

Student Outcomes

Electrical engineering graduates will exhibit a range of knowledge, abilities and behaviors prepared to enter and become a successful member of the engineering community.  These include:

  1. an ability to identify, formulate, and solve complex engineering problems by applying principles of engineering, science, and mathematics 
  2. an ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare, as well as global, cultural, social, environmental, and economic factors 
  3. an ability to communicate effectively with a range of audiences
  4. an ability to recognize ethical and professional responsibilities in engineering situations and make informed judgments, which must consider the impact of engineering solutions in global, economic, environmental, and societal contexts 
  5. an ability to function effectively on a team whose members together provide leadership, create a collaborative and inclusive environment, establish goals, plan tasks, and meet objectives 
  6. an ability to develop and conduct appropriate experimentation, analyze and interpret data, and use engineering judgment to draw conclusions 
  7. an ability to acquire and apply new knowledge as needed, using appropriate learning strategies. 

In addition to fulfilling the degree requirements listed above, the following courses must be successfully completed: WSC 001  or placement examination* and WSC 002 ; 3 hours in literature, literature in translation or comparative literature (chosen from Distribution Courses  designated LT); 3 hours in behavioral social sciences (chosen from distribution courses designated BH); 3 hours in history, philosophy, religion in social sciences (chosen from distribution courses designated HP), and 6 hours in humanities or social sciences. Students transferring in with previous social science/humanities credits may use them in place of distribution requirements in the same category as the transferred credits.

Courses


Cumulative Average


A cumulative average of C or better is required in the following courses, while a cumulative average of C or better is required in all engineering courses.

Suggested Four-Year Sequence - Total Hours: 133


First Year


  1st. Sem. 2nd. Sem.
ENGG 015 , 010  3 3
ENGG 016   - 3
WSC 001 ,002   3 3
MATH 071 ,072   4 4
PHYS 011A ,011B   5 -
PHYS 012A   - 4
Total 15 17

 

Second Year


  1st Sem. 2nd Sem.
CHEM 003A 003B   - 4
ENGG 025 , 032A   3 3
ENGG 030  3 -
ENGG 034   - 1
MATH 073 , 131   4 3
PHYS 012B   1 -
Social science or humanities **   6 3
Literature or literature in translation **   - 3
Total 17 17

 

Third Year


  1st Sem. 2nd Sem.
ENGG 036 , 104   3 3
ENGG 176 , 177   3 3
ENGG 189   - 3
ENGG 033   3 -
ENGG 032B , 193   1 3
ENGG 150   3 -
MATH 144   - 3
Social science or humanities **  3 -
Technical electives† - 3
Total 16 18

 

Fourth Year


  1st Sem. 2nd Sem.
ENGG 111   3 -
ENGG 113   3 -
ENGG 143B   3 -
ENGG 171   ENGG 178   3 1
ENGG 192   1 -
ENGG 194 , 195   - 4
TPP 112   or ENGG 019  or PHI 014  or PHI 090   - 3
Technical electives† 3 9
Total 16 17

 

Notes


*If this requirement is fulfilled by passing the placement examination, 3 s.h. in the humanities or social sciences should be taken with adviser’s approval.

**With adviser’s approval. 

†Electrical engineering majors will choose five technical electives from the following list of courses: ENGG 035 , 166 , 172 , 173 , 174 , 179 , 180 , 187 , 190 , 191 , 197 A-Z 198 199 , CSC 113 PHYS 118A ; one technical elective must be a design course: ENGG 172 , 173  or 180 .

Computer Option


The computer option in the electrical engineering program at Hofstra is an interdisciplinary field applying principles and concepts in electrical engineering and computer science to the design of computers and digital systems.  The objective of the program is to provide an integrated knowledge of the organization and operation of various classes of digital devices and systems and the interrelations between the physical hardware and the system software.  Therefore, the program offers courses in electronics, logical design, computer architecture, switching theory, data structures, microprocessor systems, operating systems, and assembly language programming, among others.  A capstone design course on digital systems and a group project requiring the design of a hardware/software system are part of the curriculum. 

Students graduating with this degree may pursue career opportunities in industry, government, private research institutions, or may continue their formal education in electrical engineering, computer engineering, or other computer related disciplines.

Students majoring in electrical engineering are eligible to declare this option.  

Suggested Four-Year Sequence for Computer Option - Total Hours: 133


First Year


  1st. Sem. 2nd. Sem.
MATH 071 , 072   4 4
PHYS 011A , 011B   5 -
PHYS 012A   - 4
ENGG 010 , 015   3 3
ENGG 016   - 3
WSC 001 , 002    3 3
Total 15 17

Second Year


  1st Sem. 2nd Sem.
CHEM 003A , 003B   - 4
MATH 073 , 131   4 3
PHYS 012B   1 -
ENGG 025  3 -
ENGG 030 , 032A   3 3
ENGG 034   - 1
CSC 014   - 3
Literature or literature in translation **   - 3
Social science or humanities **   6 -
Total 17 17

Third Year


  1st Sem. 2nd Sem.
CSC 016 017   4 3
ENGG 032B , 104   1 3
ENGG 033 , 177   3 3
ENGG 036 , 193   3 3
ENGG 150 176   6 -
MATH 144   - 3
ENGG 189   - 3
Total 17 18

Fourth Year


  1st Sem. 2nd Sem.
ENGG 113   3 -
ENGG 143B   3 -
ENGG 192 194   1 3
ENGG 195   - 1
Technical electives†† 6 6
Social science or humanities  ** 3 3
TPP 112  or ENGG 019  or PHI 014  or PHI 090   - 3
Total 16 16

Notes††


Choose the four technical electives in the Electrical Engineering program from the list below:

  1. ENGG 172 - Computer Aided Circuit Design  or ENGG 180 - Digital Signal Processing- Semester Hours: 3
  2. CSC 153 - Advanced Computer Architecture  or ENGG 153 - Advanced Computer Architecture  - Semester Hours: 3
  3. Two remaining technical electives chosen from CSC 100+ level (excluding CSC 102, 110, 110A, 111, 143A-Z, 144 A-Z, 145 A-Z, 163, 186, 194, 197, 198, and 199) and the approved list of Electrical Engineering technical electives.  

Return to {$returnto_text} Return to: Majors and Minors